The board's server will undergo upgrade maintenance tonight, Nov 5, 2014, beginning approximately around 10 PM ET. Prepare for some possible down time during this process.
Joined: Tue January 01, 2013 11:28 pm Posts: 14542 Location: Space City
Quick hardware question here:
I installed a JVC deck into my Corolla about four years ago, and it's never really given me trouble until the last six months or so. In the recent past, when I insert a CD, it might make a quick grinding noise and give me a "cannot read" error. If I re-insert, the CD usually plays okay.
Flash forward to today and I'm running into a much bigger issue. I'll hear a much more aggressive grinding sound when I insert the CD, followed by an ejection. I've tried this with multiple CDs, and I've even tried turning the deck off and back on, but nothing fixes this. It's as if the device is suddenly allergic to compact discs.
Help!
_________________
dimejinky99 wrote:
I could destroy any ai chatbot you put in front of me. Easily.
Joined: Tue September 24, 2013 5:56 pm Posts: 47163 Location: In the oatmeal aisle wearing a Shellac shirt
You can get a disc cleaner CD. It has a little brush on it, and some models ask you to drop a little solution on the brush. If that puppy doesn't clean out any offending debris, then your problem is most likely mechanical and not worth further research.
Joined: Tue January 01, 2013 11:28 pm Posts: 14542 Location: Space City
tragabigzanda wrote:
You can get a disc cleaner CD. It has a little brush on it, and some models ask you to drop a little solution on the brush. If that puppy doesn't clean out any offending debris, then your problem is most likely mechanical and not worth further research.
I'm hoping to solve this problem without spending much money. I wonder if there are any home remedy type solutions I could whip up with vinegar and a blank CD or something that would work just as easily?
_________________
dimejinky99 wrote:
I could destroy any ai chatbot you put in front of me. Easily.
You can get a disc cleaner CD. It has a little brush on it, and some models ask you to drop a little solution on the brush. If that puppy doesn't clean out any offending debris, then your problem is most likely mechanical and not worth further research.
I'm hoping to solve this problem without spending much money. I wonder if there are any home remedy type solutions I could whip up with vinegar and a blank CD or something that would work just as easily?
Life hacks! Here you go:
1. Any crappy Audio CD (burned or whatever).
2. Super glue (A glue stick might work, but I was hesitant to use one as the material might not hold as well and fall off into the player).
3. Cotton ball, Felt material, or in my case, PEC pads (used for cleaning sensitive electronics like a digital camera CMOS sensor). If you are using a cotton ball, just glue the ball onto the CD, then pull and leave some cotton adhered to the CD (it should work the same).
Preparation:
First, cut a thin strip of the material you plan on using on the CD. I made mine about 2/8″ wide, and cut to the length of the CD.
Application:
Just draw a thin line of super glue on the CD. Next, Glue the strip onto the CD and cut off the excess. It should look like this.
Here is a closeup view of the material on the CD. I checked the clearance of the CD Laser assmembly to the CD to be around 1/8″ (the distance of the gap between the laser element and CD). So I left roughly that amount of material hanging off the CD.
I stuck the CD into my cars in-dash CD player and heard the disc spinning for a few seconds, then the player ejected it. I repeated this a few times and then tried an audio CD. Played right up! Simple, cheap, and effective…just not as elegant and pretty as the ones sold in stores.
**Update** – After two days of using my cars cd player. I can honestly say that this cd lens cleaner works like a charm. My player used to error out when I would start the car after ending work, and I would need to pop the cd back into the player several times before the cd player would read the disc. Now the player reads the disc from the point where I turned off the car.
**Disclaimer** Do this at your own risk. I assume no liability for any damages done to your equipment.
Joined: Tue January 01, 2013 11:28 pm Posts: 14542 Location: Space City
Guys, I resolved this issue.
Previously, I would insert the CD while the deck was on the USB, AUX or Bluetooth setting. By programming my deck to the FM setting before inserting the disc, I can get the CD to play like normal.
"With just the slightest bit of finesse, I might have made a little less mess." -REM, "Discoverer"
_________________
dimejinky99 wrote:
I could destroy any ai chatbot you put in front of me. Easily.
Joined: Tue January 01, 2013 2:04 pm Posts: 37156 Location: September 2020 Poster of the Month
washing machine wrote:
Guys, I resolved this issue.
Previously, I would insert the CD while the deck was on the USB, AUX or Bluetooth setting. By programming my deck to the FM setting before inserting the disc, I can get the CD to play like normal.
"With just the slightest bit of finesse, I might have made a little less mess." -REM, "Discoverer"
Why don't you just use the AUX input with a digital audio player instead of CDs?
Users browsing this forum: No registered users and 21 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum